Severity:

HIGH RISK

(8.8)

Hard-Coded Authentication Credentials in Beetel 777VR1 Web

CVE-2026-2616

Analyzed

Vulnerability type

Category:

Hard-Coded Authentication Credentials

CWE:

CWE-259, CWE-798

Impact:

Unauthorized Administrative Access

Severity:

HIGH RISK

(8.8)

CVSS version:

3.1

Catch this CVE while code is being written

Detect vulnerable code directly in pull requests, so CVEs are fixed before merge.

Summary

Beetel 777VR1 routers up to firmware 01.00.09 contain hard-coded credentials within the Web Management Interface, allowing authentication with built-in accounts that cannot be fully managed by administrators.

An attacker on the local network who can reach the web interface may leverage these credentials to gain administrative access, bypassing normal authentication and configuration controls.

Affected context

This vulnerability affects Beetel 777VR1 devices using firmware versions up to 01.00.09 where the Web Management Interface is enabled and reachable on the local network.

It manifests when the device relies on fixed or undocumented credentials embedded in the firmware for management or support purposes, and those credentials cannot be fully disabled or rotated by the end user.

The risk is higher in environments where the router's management interface is exposed to untrusted local clients, guest networks, or is accessible via Wi‑Fi without strong network segmentation.

Exploit preconditions

  • Attack surface: Beetel 777VR1 Web Management Interface (HTTP/HTTPS) exposed on the local network
  • Required access: Network-level access to the device's management IP (e.g., LAN or Wi‑Fi client on the same segment)
  • Authentication state: Knowledge or discovery of the hard-coded credentials (often aided by public disclosures or documentation leaks)
  • Trigger point: HTTP(S) login request to the Web Management Interface using the built-in credentials
  • Why exploitation is possible: Authentication logic accepts non-removable, hard-coded credentials stored in firmware, allowing attackers to bypass user-managed accounts and passwords

Why this happens

The root cause aligns with CWE-259: Use of Hard-coded Password and CWE-798: Use of Hard-coded Credentials.

The firmware for the Beetel 777VR1 embeds fixed credentials for the Web Management Interface, likely intended for support, provisioning, or default setup.

Because these credentials are compiled into the device, cannot be properly changed or removed by administrators, and are accepted by the authentication layer, anyone who learns them can reliably authenticate.

This design treats authentication secrets as static implementation details rather than dynamic, tenant-controlled configuration, breaking the assumption that compromise of one device or disclosure of one password does not scale to others.

Potential impact

  • Unauthorized access to the router's administrative Web Management Interface
  • Modification of network configuration, DNS settings, and firewall rules
  • Interception or redirection of user traffic (e.g., malicious DNS or proxy settings)
  • Enabling of additional insecure services or remote management features
  • Installation of persistent malicious settings that survive reboots or factory resets
  • Use of the device as a foothold for lateral movement within the local network

General mitigation guidance

Mitigation patterns focus on reducing trust in embedded credentials and limiting management exposure:

  • Prefer devices and firmware that allow full rotation or removal of any default or vendor accounts, and prioritize configurations with unique per-device credentials.
  • Restrict access to the Web Management Interface to a dedicated management VLAN or wired-only network, avoiding exposure on guest or untrusted Wi‑Fi segments.
  • Disable remote or wireless administration where possible, and limit management to specific, trusted hosts using network ACLs or firewall rules.
  • Layer additional controls such as strong Wi‑Fi authentication, WPA2/WPA3 with robust passphrases, and separate SSIDs for guests and administration.
  • Treat router configuration as sensitive data; regularly review management settings, audit user accounts, and monitor for unexpected changes.
  • Where architectural changes are possible, place critical assets behind additional security controls so that compromise of a single router does not grant broad access.

How teams detect issues like this

Detection is best approached through configuration review and behavioral monitoring:

  • Perform configuration audits of Beetel 777VR1 devices to confirm which accounts exist, which cannot be removed, and whether default or vendor accounts are still active.
  • Use network monitoring to identify unusual access patterns to the Web Management Interface, such as logins from previously unseen hosts or at atypical times.
  • Apply host- or network-based intrusion detection systems (IDS/IPS) to flag repeated login attempts or known default credential patterns targeting the router's management port.
  • For environments using automated compliance tooling, define policies that flag devices with non-rotatable, hard-coded accounts or with management interfaces exposed on untrusted segments.
  • Incorporate hard-coded-credential checks into procurement and onboarding processes, using firmware analysis or vendor documentation reviews to avoid deploying insecure designs at scale.

Sources

SourceLink
gist.github.comgist.github.com/raghav20232023/d8dcaaa76e71790f77f8d3ea714d2afc
gist.github.comgist.github.com/raghav20232023/d8dcaaa76e71790f77f8d3ea714d2afc#reproduction-steps
vuldb.comvuldb.com/?ctiid.346266
vuldb.comvuldb.com/?id.346266
vuldb.comvuldb.com/?submit.751314

Frequently asked

questions

Typically, it is only directly exploitable from the local network, because the Web Management Interface is usually bound to LAN-facing interfaces. However, if the device is configured for remote administration or is otherwise exposed to the wider internet, the risk extends beyond the local network.

The attacker must be able to reach the router's management IP, usually by being connected to the same LAN or Wi‑Fi network. With that network access and knowledge of the hard-coded credentials, the attacker may obtain administrative control of the device.

The safest pattern is to eliminate reliance on hard-coded credentials entirely. Authentication secrets should be fully configurable by the administrator, unique per device or deployment, and removable when not needed. Access to management interfaces should be tightly scoped to trusted networks and hosts.

When selecting or designing network equipment, require that all management accounts support credential rotation and disablement, avoid universal default passwords, and enforce least-privilege access to management services. Combine these with strong network segmentation, regular configuration audits, and security-focused procurement criteria to avoid devices that depend on embedded, unchangeable credentials.

Find out what's already
exploitable in your codebase.